As of January 1, 2009, all walk-in manufacturing companies must sell their refrigeration units with Electronically Commutated (EC) motors. EC motors lower energy costs and significantly improve the walk-in cooler or freezer performance. These energy efficient motors are offered as a complete unit or as a drop-in replacement. Whichever your use is, if you are not familiar with the EC motor it may seem odd when you initially start it up.
When starting an EC motor, the motor must know where the rotor is located in order to start and continue to run. When power is first applied to the motor, the controller will apply a gradually increasing amount of current to all three windings in the motor over a period of 2 seconds. This will cause the rotor to move to a known location. This move will range from no movement at all if the rotor has stopped in the location needed for the next start or may be a much larger movement if it was a longer distance from where it needed to be. With a fan blade attached, it may even overshoot and move backwards to get to the right location. After that 2 second “positioning” period the controller will start applying power to different phases in a slow rotating pattern that increases in speed over the next 2 seconds until the rotor is moving fast enough for the controller to be able to detect its location. This second phase of the start cycle usually happens so quickly that you cannot really see what is happening. Within 3 to 5 seconds of applying power, the motor should appear to be running normally, but during those first 2 seconds the movements may seem as though the unit is having troubles starting or is broken.
