U.S. Cooler is Fully Stocked in Extruded Insulation

U.S. Cooler has unlimited supply of Extruded Insulation and has additional production capability for Extruded Walk-in cooler and freezer products.  Due to the industry-wide supply chain disruptions, U.S. Cooler has a limited supply of Foamed-in-Place Polyurethane (FIP) foam. All current orders are being fulfilled without any delay. 

U.S. Cooler is proud to be an expert manufacturer in both Extruded insulation (XPS) and Foamed-in-Place Polyurethane (FIP) walk-in coolers and freezers. Both insulations are typically readily available to walk-in manufacturers. However, recent economic events have caused a disruption in the supply chain for FIP foam. U.S. Cooler is able to fulfill all current FIP orders without any delay. We have a limited supply of FIP foam available and would encourage customers to consider extruded insulation for upcoming projects. Both types of insulation are great products and work well for a multitude of applications. Curious about the benefits of each insulation product and what would work best for your project or interested in switching your project to Extruded insulation? Let us help you decide!


U.S. Cooler Products Exceed DOE Testing Requirements

Yet again, the walk-in cooler and freezer industry has another DOE requirement deadline. Even though the R-value requirements have not changed since the original rule-making, the panel testing procedure has been clarified. Previously, the thermal resistance could be measured as a fresh R-value. With the new testing methodology, the insulation must be tested in “final chemical form”.

“For foam produced inside of a panel (“foam-in-place”), “final chemical form” means the foam is cured as intended and ready for use as a finished panel. For foam produced as board stock (typically polystyrene), “final chemical form” means after extrusion and ready for assembly into a panel or after assembly into a panel.” DOE 431.304

This means that sample pieces are taken from the center of a panel and measured for thermal resistance in final panel form rather than immediately after the insulation was blown or extruded.  The specified ASTM C518 testing method has created an even playing field for all panel manufacturers by having to test the foam in the same time frame and in the final chemical form.

All U.S. Cooler products have been tested according to the ASTM C518 testing procedure and exceed the specifications with our 4” panels. Both Extruded and Foamed-In-Place panels have been tested and meet the DOE requirements.

More information on the test procedures and DOE’s Federal Regulations can be found here: https://www.ecfr.gov/cgi-bin/text-idx?SID=dfdf7e682b2b726c81d85d76170027ce&mc=true&node=sp10.3.431.r&rgn=div6

A list of certified manufacturers with the DOE can be found here:  https://www.regulations.doe.gov/certification-data/CCMS-4-Walk-In_Coolers_and_Freezers_-_Panels.html#q=Product_Group_s%3A%22Walk-In%20Coolers%20and%20Freezers%20-%20Panels%22

How Walk-in Panels Create an Airtight Seal

stacked walk-in panels
Modular panels are equipped with cam locks and double barrel panel gaskets.

Air infiltration, or lack thereof, plays a major role in an efficient walk-in cooler or freezer. Walk-ins are manufactured to be air-tight because any cold air that escapes will lower efficiency and any warm air that enters can cause condensation and icing problems. Air and moisture infiltration can damage panel insulation, causing it to lose R-value and reduce the life of the walk-in. It seems like a walk-in constructed of numerous separate panels would be prone to air leakage, but this isn’t the case. So how do manufacturers of walk-ins create an airtight seal between panels?

gray screeding
Screed for the base of walk-in panels

Manufactures have different methods of sealing panels, but at U.S. Cooler, we use precision-cut tongue & groove insulation between two metal skins (of galvalume or stainless steel), cam locks and panel gaskets. The interlocking design of our panels ensure they fit together like puzzle pieces and are held tightly in place by aligning and tightening cam lock mechanisms. Double-barrel compression gaskets line the inside and outside of each panel. When the panels are locked into place with a cam wrench, the gaskets seal against each other and create an air and moisture barrier. Walk-in coolers without an insulated floor are inserted into a vinyl channel (screed) to prevent air from entering when mounted on concrete. (more…)

Polyurethane: One More Option For Your Walk-in

It’s Your Choice.

U.S. Cooler is one of the few manufacturers who can now offer both extruded polystyrene and foamed-in-place polyurethane insulation for walk-in coolers and freezers. As any good business does, we are always seeking new ways to serve our customers better and stay competitive in the marketplace. One of these ways is to provide additional services to our customers and dealers. Recently, we have added foamed-in-place polyurethane to our product offering. Previously, U.S. Cooler only offered extruded polystyrene insulation.

insulation polyurethane polystyrene

U.S. Cooler’s new polyurethane panels are foamed-in-place filled with class 1 polyurethane foam made from CFC and HFC free materials. By utilizing state of the art horizontal presses and technology, panels lie flat during the foaming process which reduces voids in the insulation. The panels’ structural tongue and groove, cam-locking system provides an air-tight seal between the panels restricting air infiltration into the insulation core.

U.S. Cooler’s polyurethane walk-in products are made with the same exceptional quality and performance construction that has proven successful in the industry.  By adding a new product line to our manufacturing capabilities our product excellence has not changed.  U.S. Cooler still provides the same premium, high-quality products and customer service we have been offering for over 25 years. Every walk-in is pre-assembled in our manufacturing facility before shipment to ensure precise quality control and ease of assembly in the field. All our panels come with our standard 10 year warranty.

Polystyrene Walk-in Brochure

Polyurethane Walk-in Brochure

Do Walk-in Cooler & Freezer Walls Wear Out?

Hi there,

Do walk-in cooler walls wear out over time?

I build restaurants and we are renovating a restaurant we built 17 years ago.  A supplier is recommending we replace the walk-in box, because they “break down”. I find that hard to believe. Could you please give me your opinion?


– Len Chaston


On the surface, your walk-in box probably has a few scratches, dents and slightly worn metal but overall it appears serviceable and is likely structurally sound. However, the insulation inside the panel can take a much more severe beating over the years than the exterior. The insulation has to deal with huge temperature differentials between the inside and outside of your box. Depending on the material used to insulate your box it could have absorbed a good deal of moisture, which degrades the thermal resistance of your insulation. Your old walk-in was also not built to meet modern efficiency and safety requirements and it could even contain a large amount of wood (which is a poor and water permeable insulator). If you have a walk-in freezer, one indication of trouble is ice buildup on the inside of the box. This is a sign that water vapor has been able to infiltrate the insulation.

At 17 years old, the cost of running the walk-in for several years as well as the added load and wear on your refrigeration unit will far overshadow the cost of purchasing a new walk-in unit. If you do decide to opt for a new walk-in, I want you to take a look at the inside of the panels when your old unit is disassembled. A panel that is now leaking all over the floor was no longer doing the job it was intended to.

leaking walk-in panel
Ice buildup in a walk-in panel

False Information about Extruded Polystyrene

Recently, there has been a document circulating in the industry that has a lot of misinformation concerning the use of extruded polystyrene insulation and its compliance with the Energy Independence Security Act of 2007.

We normally ignore incorrect information that is generated with the sole purpose of discrediting a competitor but the severity of this document begs to be clarified.

The document can be found by clicking the pdf icon.pdf icon

extruded polystyrene insulation
Extruded Polystyrene Panels

First, there are presently two types of foam insulations being used in the manufacture of walk-in coolers and freezers in the United States.  These insulations are Extruded Polystyrene and Foamed –in –Place Polyurethane insulation.  Many companies in North America have the ability to use both types of these insulations.  Both insulations have benefits that can be used to provide a quality walk-in cooler or freezer. Companies that use both types of insulation can apply each of these insulations in parts of a walk-in that they perform best and therefore bring the best designed quality walk-in cooler or freezer to the marketplace.  Some companies do not have the capability and therefore turn to attacking the insulations they do not have the ability to use with misleading information to compensate for this deficiency.   This situation seems to be one of them.  There are six points that need to be addressed. (more…)